KWIK-WAY SVSII Valve Refacer

KWIK-WAY
012-0005-25
In den Korb
  • Beschreibung
  • Mehr
  • Spezifikationen

Precision, Performance and Profits...

The results you can expect from KWIK-WAY's continuing efforts to bring you the very best valve refacer available.

The Deluxe control panel places important features at your fingertips - valve counter, chuck speed control, separate switch positions for spindle and chuck motors, valve speed chart, and machine maintenance chart.

  • KWIK-WAY's precision 6-ball chuck for fast, accurate centering of your valves - no collets to change

  • Standard 4mm to 14.3mm chuck capacity

  • Variable speed chuck to match the proper speed needed to grind today's variety of valve materials

  • Rocker arm grinding attachment included

  • .0005" accuracy for standard chuck (012.1575.94)

  • Color: red


 

Consistent Accuracy:

The main advantage that others have failed to duplicate is Kwik-Way’s exclusive six-ball centerlining chuck. The two sets of balls (three in each set), automatically find the existing valve stem centerline. 

This chuck handles any valve stem from 4mm to 14.3mm 
Other machines can require as many as nine separate collets to achieve the same range. Collet and "so-called centerless grinders"  transfer wear from the valve stem directly to the valve face during grinding. Historically, these designs are only capable of achieving their advertised accuracy on NEW valves.
The Kwik-Way Six-Ball, Centerlining Chuck design triangulates (or centers in) the wear area of the valve stem in order to grind the face concentric to the actual stem centerline.  Because the two sets of centering balls act independently, 
taper on the valve stem will not affect accuracy (even on new valves).  
This feature is available EXCLUSIVELY with the SIX-BALL CENTERLINING CHUCK - a standard feature on all KWIK-WAY SVS II DELUXE Valve Refacers.
The Kwik-Way design features dovetail ways which remain adjustable for long-term accuracy. The valve position swivel plate is indexed in 1º increments to ensure accuracy of grinding angles from 13º to 62º.
 

Specifications Min. chuck capacity:  4,0 mm
Max. chuck capacity:  14,3 mm
Valve head diameter capacity: 19,05 - 101,6 mm
Min. stem length:  85,73 mm
Valve wheel diameter:  178 mm
Surface wheel diameter:  76 mm
Spindle drive motor: 1/2 HP
Chuck drive motor gear drive: 1/12 HP
Coolant capacity:  3.8L
Valve wheel rotation: 3450 RPM
Stem wheel rotation: 3450 RPM
Chuck speed variable speed: 100 - 300 RPM
Min. air requirement: 65 PSI
Overall length: 940 mm
Overall width: 599 mm
Overall height: 406 mm