Simplex Big 2B (two tanks) parts washers are precisely designed for washing and rinsing of very heavy medium and big sized parts.
Simplex Big parts washer is fitted with an external trolley where parts are located.
Operators push then the platform with parts inside the washing cabin, close the vertical door through a two-hand control system and start the working process.
A stainless steel pump carries out the washing through the liquid intake from the tank and sprays it over the parts while a gear motor slowly rotates the platform.
After parts washing and a short dripping, rinsing starts: during this phase a second pumps starts the rinsing liquid intake from the second tank and sprays it over the parts through specific pipes.
The parts washer can be entirely designed thanks to many accessories available and the whole working process is controlled by an industrial PLC.
On a touchscreen display and thanks to an intuitive software can be changed the operating parameters very easily, and checked the status of the installed devices as well as changed the 16 programs available.
Simplex Big parts washers are extremely solid and with a long life, and reduce operator hours, thus ensuring excellent results with very low operating costs.
A number of accessories are available: hot-air drying, high pressure pump, integrated manual washing, and many others.
TECHNICAL FEATURES
• Pneumatic opening and closing of the lid with 2 safety hands control
• Timed electric exhaustion of steam
• Aisi 304 stainless steel external trolley with drip tray and wheels with safety brake
• ISO pneumatic cylinders and “fall-proof” pneumatic safety valves
• Thermal tank insulation with Aisi 430 stainless steel panels
• Siemens® electric power parts
• 4” color touchscreen display for settings and programs
• Box filter made up of 6 Aisi 304 SS vertical filters for pre-filtration of the liquid flowing back into the tank
• Aisi 304 stainless steel filter in pump intake
• Triple gasket for door (bottom, top and side) and gaskets on all tank lids
• Structure and sheet metal in contact with liquid in Aisi 304 stainless steel
• Minimum level switch
• Gearmotor for basket rotation with torque limiter and centering sensor
• Sludge drain hatch for simple tank cleaning
• Reinforced pressed grating platform with galvanized steel raised outer edge
• Aisi 304 stainless steel electric pump with special seals
• Weekly programming to start heating and deoiler (if installed)
• IP65 electrical system, management via PLC touchscreen (DGT V4)
• Heating of the liquid with stainless steel electric heating element
• Internal welding bleaching
• Tanks accessible from the outside
• Stainless steel bottom section load-bearing structure
• Aisi 304 stainless steel washing pipelines with professional stainless steel flat nozzles
• Drain valves for emptying tanks
• Manual water filling valve
HT VERSION
• Heat insulation with Aisi 430 stainless steel panels
MODELS
| | Washing capacity ( Ø x H ) | Basket load capacity | Tank |
| Simplex Big 2B 1000 | Ø 90 x H 70 cm | 600 Kg | 250 lt / 250 lt |
|---|
| Simplex Big 2B 1200 | Ø 110 x H 80 cm | 600 Kg | 300 lt / 300 lt |
|---|
| Simplex Big 2B 1400 | Ø 128 x H 90 cm | 600 Kg | 400 lt / 400 lt |
|---|
| Simplex Big 2B 1800 | Ø 165 x H 100 cm | 800Kg | 500 lt / 500 lt |
|---|
| Simplex Big 2B 2200 | Ø 200 x H100 cm | 800Kg | 750 lt / 750 lt |
|---|
| Simplex Big 2B 2600 | Ø 240 x H100 cm | 800Kg | 750 lt / 750 lt |
|---|
Download SME/Teknox brochure
